Here are the parts to your SET 820-S.
Please check and make sure you have all the items:
A: RR 820 Receiver/Listening device
B: TR 820 Transmitter/Charging unit
C: TV Connecting cable (1/8" mini plug with 1/4" adapter)
D: NT 820 Power supply
E: MKE 800-TV External microphone (for TV's without an "AUDIO OUTPUT" socket)
F: BA 151 rechargeable battery (found inside A)
G: Adapter for RCA sockets for audio output on TV
Click here for images
Before connecting the SET 820-S to the TV, you must charge the battery for 24 hours. Connect D to the back of B labeled POWER and then plug the other end into an elextrical socket. Insert A into the cradle of B. You will know it is charging when a green light on the front of B is on.
Steps to Getting Started:
1. Plug the end of cable C into the back of B in the socket labeled LINE.
2. Plug the other end of C into cable G, and then into the socket(s) on your tv labeled AUDIO OUT.
NOTE: Also enclosed is an external microphone E. You have the option of using this external mic instead of following step #2 (you only need one source either E or C).
To use plug into back of B into socket labeled MIC and then attach the other end of E to the speaker of the TV (located on the front or side of the TV) by removing the plastic strip form the velcro and press firmly against the speaker of the TV.
3. Using cord D, plug adapter into the back of B labeled POWER and then plug other end of D into electrical socket. Place B on or beside the TV facing you.
4. Insert the ear bud of A into your ears so that the round dial hangs under your chin and the numbers are facing the TV.
5. Adjust the volume by turning the black round dial.
For detailed information and instructions, please refer to the SET 820-S Instruction manual.
To Purchase the Sennheiser 820s please visit:
http://www.harriscomm.com/catalog/product_info.php?products_id=18753
For free shipping enter the coupon code: oticon
|